High temperature lithium polymer battery

High storage energy density 503040 550mAh rechargeable lithium ion battery pack

High storage energy density rechargeable lithium ion battery pack with UN38.3 UL1642 KC CB CE certification

Product Specification:
  • Model : 503040                                             
  • Rated Voltage(V) : 3.7V
  • Rated Capacity(mAh) : 550mAh
  • Charging Voltage : 4.2V
  • Weight : 12g
  • Dimension : (Max)5.0*30*40mm(Max)
INQUIRY NOW
Product Details

Specification:

  Model:   503040
  Rated Voltage(V):   3.7V
  Rated Capacity(mAh):   550mAh
  Charging Voltage:   4.2V
  Weight:   12g
  Dimension:   5.0*30*40mm(Max)
  Impedance:   ≤80mΩ
  Charging Current:   275mA
  Discharging Current:   275mA
  Discharging Cut-off Voltage:   3.0V
  Charging Temperature Range:   0~45℃
  Discharging Temperature Range:   -20~70℃
  Storage Temperature Range:   -20~90℃
  Temperature Protection:   90℃±5℃


 

Product Features:

  1. Mature technology, regular appearance, good hardness, consistent size and platform;
  2. Capacity can maintain over 80% after 500 cycles at 0.5C (can provide special solution that can reach 800 cycles);
  3. Discharge temperature ranges from -20℃ to 60℃;
  4. Excellent safety performance, and battery volume energy density can reach 500-600Wh/L.

 

 

 Storage
●The Li-ion polymer LI-ion battery pack should be stored in a cool, dry and well-ventilated area, and should be far from the fire and the high temperature. 
●The polymer LI-ion battery should store in the product specification book stipulation temperature range, the best storage temp. is 25±5℃. The best humidity is 60±15%.
●The polymer LI-ion battery should be stored within room temperature, and charged to 40%~60% electric quantity(3.85V). In order to avoid over-discharge, we suggest charge and discharge the batteries every three months.,Then charge to40%~60%electric quantity(3.85V).

 Transportation
●Do not mix the polymer LI-ion battery products with other cargoes.
●Do not immerse the li-ion polymer LI-ion battery products in water or allow it to get wet.
●Do not over 7 layers staking and upside-down.
●The highest temperature in transportation is lower than 60℃.

Use Attentions
To ensure proper use of the polymer LI-ion battery please read the manual carefully before using it.

 Warnings
●Do not expose to, dispose of the polymer LI-ion battery in fire.
●Do not put the polymer LI-ion battery in a charger or equipment with wrong terminals connected.
●Avoid shorting the polymer LI-ion battery.
●Avoid excessive physical shock or vibration.
●Do not disassemble or deform the polymer LI-ion battery.
●Do not immerse in water.
●Do not use the polymer LI-ion battery mixed with other different type or model batteries.

 Charge
●polymer LI-ion battery must be charged in appropriate charger only.
●Do not leave polymer LI-ion battery in charger over 24 hours.
●Charging current: Can not surpass the biggest charging current which in this specification book stipulated.
●Charging voltage: Does not have to surpass the highest amount which in this specification book stipulated to decide the voltage.
●Charge temperature: The polymer LI-ion battery must carry on the charge in the ambient temperature scope which this specification book stipulated.
●Uses constant current and constant voltage way charge. PLS connect the positive and negative terminals in right way, or the polymer LI-ion battery may be damaged.
 

Discharge
●he discharging current should not surpass the biggest discharging current this specification book stipulation, The large discharge current can cause heat and lower capacity.            
●Discharge temperature: The polymer LI-ion battery discharge must carry on in the ambient temperature scope which this specification book stipulated.
●Over-discharge: After short time over discharge, then charge immediately won’t damage the polymer LI-ion battery. But the polymer LI-ion battery will be damaged for being long time over discharged. During long-term storage, the polymer LI-ion battery may be within over-discharging condition for self discharge. To prevent the occurrence of over discharging, the polymer LI-ion battery should maintain the certain capacity when storage.
 

Handling of Cell
●Soft Aluminium foil
Don’t strike polymer LI-ion battery with any sharp edge parts
Trim your nail or wear glove before taking polymer LI-ion battery
Clean worktable to make sure no any sharp particle
●Sealed edge may be damaged by heat above 100°C, bend or fold sealed edge.
●Avoid some components to contact the edge of packing foil of batteries   
 

Product Feature:

Discharging rate remains 85% at 90℃.

 

Application Fields:

Vehicle recorder, smart water cup, MWD in oil industry, fieldwork monitoring etc.

Write us

Welcome to our company website, thank you for your letter, we will give you a reply in the first time, would you please leave your information and contact way!

Technical Support: Magic Lamp