High temperature lithium polymer battery

703343-2S-7.4v-1000mAh lithium ion battery pack for MWD in oil industry

2s lithium ion battery pack for MWD in oil industry

Product Specification:
  • Model : 703343-2S
  • Rated Voltage(V) : 7.4V
  • Rated Capacity(mAh) : 1000mAh
  • Charging Voltage : 4.2V
  • Weight : 19g
  • Dimension : (Max)7.0*33*43mm(Max)
INQUIRY NOW
Product Details

Specification:

   Model:   703343-2S
  Rated Voltage(V):   7.4V
  Rated Capacity(mAh):   1000mAh
  Charging Voltage:   8.4V
  Weight:   19g
  Dimension:   7.0*33*43mm(Max)
  Impedance:   ≤65mΩ
  Charging Current:   500mA
  Discharging Current:   500mA
  Discharging Cut-off Voltage:   3.0V
  Charging Temperature Range:   0~45℃
  Discharging Temperature Range:   -20~70℃
  Storage Temperature Range:   -20~90℃
  Temperature Protection:   90℃±5℃


 

Product Features:

  1. Mature technology, regular appearance, good hardness, consistent size and platform;
  2. Capacity can maintain over 80% after 500 cycles at 0.5C (can provide special solution that can reach 800 cycles);
  3. Discharge temperature ranges from -20℃ to 60℃;
  4. Excellent safety performance, and battery volume energy density can reach 500-600Wh/L.

 

 

 Storage
●The Li-ion polymer LI-ion battery pack should be stored in a cool, dry and well-ventilated area, and should be far from the fire and the high temperature. 
●The polymer LI-ion battery should store in the product specification book stipulation temperature range, the best storage temp. is 25±5℃. The best humidity is 60±15%.
●The polymer LI-ion battery should be stored within room temperature, and charged to 40%~60% electric quantity(3.85V). In order to avoid over-discharge, we suggest charge and discharge the batteries every three months.,Then charge to40%~60%electric quantity(3.85V).

 Transportation
●Do not mix the polymer LI-ion battery products with other cargoes.
●Do not immerse the li-ion polymer LI-ion battery products in water or allow it to get wet.
●Do not over 7 layers staking and upside-down.
●The highest temperature in transportation is lower than 60℃.

Use Attentions
To ensure proper use of the polymer LI-ion battery please read the manual carefully before using it.

 Warnings
●Do not expose to, dispose of the polymer LI-ion battery in fire.
●Do not put the polymer LI-ion battery in a charger or equipment with wrong terminals connected.
●Avoid shorting the polymer LI-ion battery.
●Avoid excessive physical shock or vibration.
●Do not disassemble or deform the polymer LI-ion battery.
●Do not immerse in water.
●Do not use the polymer LI-ion battery mixed with other different type or model batteries.

 Charge
●polymer LI-ion battery must be charged in appropriate charger only.
●Do not leave polymer LI-ion battery in charger over 24 hours.
●Charging current: Can not surpass the biggest charging current which in this specification book stipulated.
●Charging voltage: Does not have to surpass the highest amount which in this specification book stipulated to decide the voltage.
●Charge temperature: The polymer LI-ion battery must carry on the charge in the ambient temperature scope which this specification book stipulated.
●Uses constant current and constant voltage way charge. PLS connect the positive and negative terminals in right way, or the polymer LI-ion battery may be damaged.
 

Discharge
●he discharging current should not surpass the biggest discharging current this specification book stipulation, The large discharge current can cause heat and lower capacity.            
●Discharge temperature: The polymer LI-ion battery discharge must carry on in the ambient temperature scope which this specification book stipulated.
●Over-discharge: After short time over discharge, then charge immediately won’t damage the polymer LI-ion battery. But the polymer LI-ion battery will be damaged for being long time over discharged. During long-term storage, the polymer LI-ion battery may be within over-discharging condition for self discharge. To prevent the occurrence of over discharging, the polymer LI-ion battery should maintain the certain capacity when storage.
 

Handling of Cell
●Soft Aluminium foil
Don’t strike polymer LI-ion battery with any sharp edge parts
Trim your nail or wear glove before taking polymer LI-ion battery
Clean worktable to make sure no any sharp particle
●Sealed edge may be damaged by heat above 100°C, bend or fold sealed edge.
●Avoid some components to contact the edge of packing foil of batteries   
 

Product Feature:

Discharging rate remains 85% at 90℃.

 

Application Fields:

Vehicle recorder, smart water cup, MWD in oil industry, fieldwork monitoring etc.

Write us

Welcome to our company website, thank you for your letter, we will give you a reply in the first time, would you please leave your information and contact way!

Technical Support: Magic Lamp